Problem identifying my self as operator

Discussion of EFnet's IRCDs (hybrid, ratbox, csircd)

Moderators: Website/Forum Admins, Software/IRCD Moderators

borisprochazka
Posts: 2
Joined: Thu Jan 27, 2011 6:59 am

Problem identifying my self as operator

Postby borisprochazka » Thu Jan 27, 2011 7:41 am

I have problem login as operator for the different services:

/msg chanserv ologin boris <passwd>

I have succeeded to register a user, but due to the above problem I can't create channels.

I an using the ircd-ratbox 3.0.6 and ratbox-services 1.2.4 running on Ubunto linux 2.6.32-27-server ,
conftest report no errors and logs don't say anything out of ordinary. If I understand it right the
operator shuld be configured in the ratbox-services.conf file in the oper section:

operator "boris" {
/* user: specifies a user@host who may connect.
* multiple may be specified, wildcards are accepted.
*/
user = "boris@*";
password = "password";
encrypted = no;


/* the rest of this section is according to the suplied example.conf
*/
}

The error message I get from the IRC-client is:
/msg chanserv ologin boris password
No access to CHANSERV::OLOGIN

Does anybody have a clue?
borisprochazka
Posts: 2
Joined: Thu Jan 27, 2011 6:59 am

Re: Problem identifying my self as operator

Postby borisprochazka » Thu Jan 27, 2011 7:59 am

I really wanted to upload the full configuration files for both the ircd and services, but the efnet forum gui complains about the filename extension. I have tried .conf .txt and non at all, with out success. Please let me know what extensions are allowed or your mail address and I send it to you by mail.
User avatar
munky
Site Admin
Posts: 826
Joined: Wed Jul 02, 2003 4:54 pm
Location: Phoenix AZ
Contact:

Re: Problem identifying my self as operator

Postby munky » Thu Jan 27, 2011 4:32 pm

i wasn't aware we allowed file uploads


i'm not very familiar with ratbox services. doesn't it use it's own user database separate from ircd.conf? ratbox-services is anfl's pet project, as far as i know
In God we trust,
Everyone else must have an X.509 certificate.
User avatar
Kottalizer
Posts: 18
Joined: Sat Jun 25, 2011 1:11 pm

Re: Problem identifying my self as operator

Postby Kottalizer » Fri Feb 24, 2012 10:50 pm

You need to /oper up first using the credentials you specified in ircd.conf. When you have done that, OLOGIN should work.
[O] Only few of mere mortals may try to enter the twilight zone
[CHANFIX] Incorrect username or password.
User avatar
dubkat
Posts: 40
Joined: Fri Sep 19, 2003 4:59 am
Location: Colorado, USA
Contact:

Re: Problem identifying my self as operator

Postby dubkat » Fri Mar 16, 2012 3:15 am

In the future, visit us on #ratbox for support with ircd-ratbox and ratbox-services.
Dan
[A] efnet.port80.se
[O] efnet.portlane.se, irc.nordunet.se
[CHANFIX] Authentication successful. Welcome, dubkat.
ircd-ratbox & dronemon developer

Return to “IRCD”

Who is online

Users browsing this forum: Google [Bot] and 2 guests